DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

10 months later, "shelf life", capacity...

  • eatatjoes10 Thursday, June 07, 2012 8:24 AM Reply
    I received 2 pairs of these in August 2011, and measured capacity of two of them with a fixed resistor, capacity was:
    cell 1 @302 mA: 1592 mAh
    cell 2 @296 mA: 1989 mAh
    (Thread: "Measured capacity, very bad performance")

    Now, ten months later I have a "Accucell 6" (same as IMax B6) and measured all cells again at 0,2 amps:
    cell A: 1760mAh
    cell B: 1740mAh
    cell C: 1570mAh
    cell D: 1440mAh
    All cells were charged @1A before discharge.

    Cell C seems to be defective, it charges forever, charging current stays at 0,3amps, and it becomes warm after a while.

    All cells were stored, not used, in those ten months (I had no use for them, too weak)
    experienced toddler
    Posts(207) | Reviews | Tip post

    post edited by eatatjoes10 on 6/7/2012 at 8:40 AM
  • desolder Top 10 Forum Poster Thursday, June 07, 2012 11:23 AM Reply
    Thanks for the 10 month update. Very disappointing.
    What's up with the scrubbed LED driver IC markings?
    What are they trying to hide?

    Posts(6964) | Reviews | Tip post

«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere