Wish
DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

Hello! Anybody has User Guide in English language?

  • nikossv Wednesday, November 30, 2011 12:29 PM Reply
    Hello!

    I received this MIFI a few days ago.
    I tried the instructions from the User Guide in Chinese, but I can't connect to WiFi network, because it is secured and I don't know the password. I tried different combination of 1234, 123456, and other combinations like that, but it doesn't work and I don't know Chinese.
    I also tried to connect via cable. I set my lan IP to static IP like instructions from the User Guide (192.168.169.2). LAN says it is "Connected", but I cant access the configurations page from the browser; I get "Internet Explorer cannot display the webpage" error.
    If someone succeeded to access the configuration page, or has User Guide in English language please post it here.
    Posts(11) | Reviews | Tip post

  • nikossv Wednesday, November 30, 2011 2:13 PM Reply
    Hello!
    I have tied 192.168.169.1 and I get this error "Internet Explorer cannot display the webpage" error. I have tried on two different computers and with different browsers(Internet Explorer 8 and Firefox 8). The connection is made, because on PC the Local Area Network says "Connected", but I cannot access the configuration page.

    Please if anybody has any info please post it here.

    Thanks in advance.
    Posts(11) | Reviews | Tip post

  • nikossv Wednesday, November 30, 2011 3:46 PM Reply
    I have set manual
    IP Address: 192.168.169.2
    SubnetMask:255.255.255.0
    Gateway:192.168.169.1

    DNS:192.168.169.1
    like instruction manual said
    http://imageshack.us/photo/my-images/856/0004op.jpg/
    img src: http://imageshack.us/photo/my-images/856/0004op.jpg/


    http://img856.imageshack.us/img856/1061/0004op.jpg
    img src:
    http://img856.imageshack.us/img856/1061/0004op.jpg

    Posts(11) | Reviews | Tip post

  • nikossv Wednesday, November 30, 2011 4:02 PM Reply
    If I PING the gateway (ping 192.168.169.1) I have no response.
    I am running out of ideas. :(
    Posts(11) | Reviews | Tip post

  • nikossv Wednesday, November 30, 2011 5:56 PM Reply
    FINALLY I managed to get into the web configuration page.
    These are the steps I did:
    1. I disconnected from my Wifi network.
    2. I power up the MIFI.
    3. I set my LAN to Obtain IP automatically.
    4. I connected lan cable to MIFI and the to my notebook lan port.
    5. I waited for the connection to be made.
    6. I opened a cmd window (Start-->Run--->cmd - and hit Enter).
    7. In the new window type: ipconfig /all.
    8. check the gateway address.
    9. Type that address in Internet explorer; it will ask user and password (both are admin).
    10.Configuration page is opened (sadly it's mostly in Chinese.)

    I hope this helps other people too.

    If HAME has english firmware for the A8 would be great to share it with us.
    Posts(11) | Reviews | Tip post

  • konradReiter Friday, December 2, 2011 4:00 AM Reply
    I have English User Guide, just do not know how to post it here.
    Send me ur e-mailadd and I send to u.
    Posts(1) | Reviews | Tip post

  • nikossv Saturday, December 3, 2011 11:40 AM Reply
    HI everybody!

    Thanks to everybody who tried to help me.
    I managed to connect to web configuration page and I also managed to change the language to English.
    Below is a picture with the steps to change the web configuration to English.

    http://img545.imageshack.us/img545/3884/hamea8en.jpg
    img src:
    http://img545.imageshack.us/img545/3884/hamea8en.jpg


    Posts(11) | Reviews | Tip post

  • rfukuda Tuesday, December 6, 2011 1:23 PM Reply
    Thanks for this.
    Posts(23) | Reviews | Tip post

  • rfukuda Tuesday, December 6, 2011 5:17 PM Reply
    Hame HM-436R user manual (same Control Panel):
    http://www.mediafire.com/?yx8eddn3bq2dxm0
    (.doc)
    Posts(23) | Reviews | Tip post

  • JHAres Saturday, April 13, 2013 6:45 PM Reply
    Hi Nikoss,

    Same problem here now (haven't this issue when new)... With automatic IP does not appear gateway IP.... do you remember wich IP you got ?

    Thanks !!!
    Posts(31) | Reviews | Tip post

«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere