Wish
DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

Is it a USBISP programmer?

  • indoo Tuesday, May 15, 2012 3:17 PM Reply
    Is it a USBISP programmer with JTAG cable for debugging AVR board?
    6 pin cable is suggesting it is an ISP programmer. In that case, it may be used to upload bootloader and other sketches.
    10 pin cables are normally used for JTAG - debugging. But arduinos don't have any JTAG debugging facilities but sanguino have one. And it could be used for other AVR boards.

    Kindly let me know whether my presumptions are correct or not?
    Posts(17) | Reviews | Tip post

  • DrJones Saturday, May 19, 2012 12:25 PM Reply
    No, 6-pin and 10-pin are common for normal ISP. I doubt this has JTAG.
    Posts(1593) | Reviews | Tip post

  • indoo Monday, May 21, 2012 11:47 AM Reply
    Thanks, DrJones, kindly clarify whether it follows stk500 protocol or not? Also is the atmega chip on green board is doing the function of FTD232 (usb to serial) chip?
    Posts(17) | Reviews | Tip post

  • CarolinaMontes Thursday, May 31, 2012 3:08 PM Reply
    It's based on the Ladyada USBtinyISP design, simple and cheap.
    http://www.ladyada.net/make/usbtinyisp/
    Ravc_cs

    Posts(1) | Reviews | Tip post

«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere