DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

What Port Type? Photo and Description Don't Agree

  • eugbug1 Sunday, November 24, 2013 6:05 PM Reply
    Does the valve have bayonet/barb connections, 1/2 inch BSP male thread or a 1/2 inch compression connection suitable for use with olive rings? The description mentions barbs but the photo shows threads.
    Eugene's Arduino Blog

    Posts(27) | Reviews | Tip post

  • Tendyxu @DX Staff @DX Staff Friday, November 29, 2013 2:14 AM Reply
    [email protected],
    Port size: G1 / 2" (4 exceptionally thread) . This solenoid valve requires a lowest pressure of 0.02Mpa, a maximum 0.8Mpa. Water pressure too low or too high is not available to open or close the solenoid valve , high pressure will cause damage to the valve body.
    Does this info do something help for you? please let me know, thanks.
    Have a nice day.
    Posts(704) | Reviews | Tip post

  • eugbug1 Monday, December 02, 2013 5:50 PM Reply
    Thanks for the update. The description mentions barbs which push into a hose and are tightened with hose clips. The photo shows ports with male threads. So are female threaded barb adapters supplied with the product?
    Eugene's Arduino Blog

    Posts(27) | Reviews | Tip post

  • Tendyxu @DX Staff @DX Staff Sunday, December 15, 2013 12:27 PM Reply
    [email protected],
    Sorry, the female threaded bard adapters do not supplied with the products or on the website.
    Have a nice day.
    Posts(704) | Reviews | Tip post

«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere