Wish
DX  » Community » Forums
«See all threads (in Arduino Enthusiasts)
Arduino Enthusiasts

USB hosthield not working

  • remco1271 Friday, January 24, 2014 12:48 AM Reply
    I have buy arduino hostshield.
    I have used the library https://github.com/felis/USB_Host_Shield_2.0.
    On http://www.circuitsathome.com/usb-host-shield-hardware-manual I couldn't find what i did wrong.
    I have soldered the 5V and the 3,3V from the header and het 5V next to the USB header.
    My wirred mouse and my phone "Sony xperia go" are not working i get the message: "OSC did not start."
    That message comes from:
    if (Usb.Init() == -1)
    Serial.println("OSC did not start.");
    The hostshield that I have http://dx.com/p/usb-host-shield-2-0-board-166217
    I hope that you can help me.
    Posts(10) | Reviews | Tip post

  • remco1271 Saturday, January 25, 2014 8:57 PM Reply
    My shield is working on the UNO of my friend and not on my arduino Mega
    Posts(10) | Reviews | Tip post

«Reply to this thread (in Arduino Enthusiasts)
Arduino Enthusiasts

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere