DX  » Community » Forums
«See all threads (in Arduino Enthusiasts)
Arduino Enthusiasts

SKU 153073 (16-in-1 Smart Car Chassis ) problem

  • bstulic Sunday, May 18, 2014 5:33 PM Reply

    I have problem to fit motors into metal part that carries it. Its 2 screws plus plastic bulge that have to fit, but its either 2 screws installed and plastic bulge not fit into hole in metal, or, if I first put bulge into hole, I can only fit one screw.
    Motor can be seen on this link:

    img src: http://img02.taobaocdn.com/bao/uploaded/i2/T1dgm5FutbXXXXXXXX_!!0-item_pic.jpg

    and bulge can be seen on lower side.

    Am I doing something wrong?
    Posts(6) | Reviews | Tip post

    post edited by bstulic on 5/18/2014 at 5:34 PM
«Reply to this thread (in Arduino Enthusiasts)
Arduino Enthusiasts



* 50 characters max


Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere