Wish
DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

Where to get an x10 probe w/ the connector?

  • chimo Friday, June 11, 2010 1:55 PM Reply
    I've ordered one of these. Any ideas where to get an x10 probe for it?
    Posts(58) | Reviews | Tip post

  • weberschi Wednesday, July 7, 2010 4:22 PM Reply
    First question that comes to mind when i buying this osc. , probes for this, as it uses smb connector, there is no probes available in the market, please if anyone got a probe let us know, thanks all.
    Posts(5) | Reviews | Tip post

  • DpakoH Thursday, August 12, 2010 6:24 AM Reply
    You can set 10x mode probe by pressing for a long time button M on first menu item (Level/Sensitivity).
    Posts(77) | Reviews | Tip post

  • EDDIEMUTANTE Saturday, November 20, 2010 11:12 AM Reply
    Hi there! 've found this probes
    http://www.elechouse.com/elechouse/index.php?main_page=product_info&products_id=447&zenid=0a33b966634e45b8b6d2685889fdfe35
    I think will work.
    A greeting!
    Posts(16) | Reviews | Tip post

  • jims123 Tuesday, May 17, 2011 9:58 AM Reply
    The unit I just received in the mail about 15 may 2011 has a probe with a slide switch on it to select either 1X or 10X attenuation inside probe itself .. it has standard spring loaded probe clip adapter too .. very useful. I did not see a way to Compensate it from inside the probe.. but the calibrate out waveform is nice and square as-is so it seems well compensated already.
    Posts(13) | Reviews | Tip post

«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere