DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

Is it hanging very lose into the Micro SD port?

  • adr990 Saturday, July 24, 2010 7:40 PM Reply
    Is it hanging very lose into the Micro SD port?
    Or does it actually stay without holding it all the time.

    Or eventually, if you did tape it on the device and put the Micro SD cable into the Micro SD Port, it would stay fine, right? (I hope) Even with a quite amount of moving/shaking?

    Thanks in advance!
    Posts(110) | Reviews | Tip post

  • adr990 Monday, August 16, 2010 10:48 AM Reply
    Bump. :)
    Posts(110) | Reviews | Tip post

  • davecuk Thursday, September 15, 2011 3:54 AM Reply
    Mine won't stay in the MicroSD card slot, so is useless.
    Posts(10) | Reviews | Tip post

  • Exhalum Wednesday, February 19, 2014 2:27 AM Reply
    The ribbon is extremely thin , ( about 1/10 the thickness of a real Micro SD card ).
    I was not able to easily use this without first adding additional thickness to it. I cut some thick plastic and taped it to the end ( so that it would be nearly as thick as a regular micro SD card )

    The devise is cheap, but may require some work to get it to do what you want..
    Posts(40) | Reviews | Tip post

«Reply to this thread (in Product Forum)
Product Forum



* 50 characters max


Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere