Wish
DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

I get no reading whatsoever, broken unit?

  • Nuppi Wednesday, June 1, 2011 3:46 AM Reply
    Hi.
    No matter what i test i just get 000 as result.
    I changed the test leads too but didnt help.

    Any ideas how to fix this?


    http://img689.imageshack.us/img689/1584/dxmultimeterbackcopy.jpg
    img src: http://img689.imageshack.us/img689/1584/dxmultimeterbackcopy.jpg

    Posts(39) | Reviews | Tip post

  • g7ocm Wednesday, June 1, 2011 4:02 AM Reply
    Are the other ranges the same? Does the display show open circuit on 200ohms range and about zero when you short the leads out? Does the display ever update?

    It looks faulty to me, but as you have to open the meter up to fit the battery perhaps you should have a quick look around inside and look for a bad solder joint as it shouldn't invalidate the warranty (normal accepted operational procedure)
    Posts(209) | Reviews | Tip post

  • Nuppi Wednesday, June 1, 2011 5:13 AM Reply
    Thank you for the reply.
    This is what i get for 200ohm:

    http://img688.imageshack.us/img688/3826/dxmultimeter200ohm.jpg
    img src: http://img688.imageshack.us/img688/3826/dxmultimeter200ohm.jpg



    The display refreshes, when i put the meter to DCA the number keeps changing all the time. Like here:

    http://img687.imageshack.us/img687/267/dxmultimeterdca.jpg
    img src: http://img687.imageshack.us/img687/267/dxmultimeterdca.jpg



    I guess this isnt normal?
    I dont know anything about these multimeters, just wanted some cheap one to check my battery voltages.
    Posts(39) | Reviews | Tip post

  • Nuppi Sunday, June 5, 2011 11:00 AM Reply
    Can anyone say if this is a defective unit or can i fix it somehow?
    Posts(39) | Reviews | Tip post

  • googgy Sunday, June 5, 2011 11:40 AM Reply
    i'm sure that probes are ok as we can see
    i'm sure that fuse is ok because of above
    so
    it's dead and have to be replaced by DX

    "who's Zed?"
    "Zed's dead"
    Posts(1396) | Reviews | Tip post

    post edited by googgy on 6/5/2011 at 11:40 AM
  • Nuppi Sunday, June 5, 2011 11:45 AM Reply
    Thank you very much for your reply.
    Posts(39) | Reviews | Tip post

  • cyclist Moderator Sunday, June 5, 2011 11:51 AM Reply
    Try measuring it on a normal battery, AA or AAA, that way it will rule out the possibility that the batterys protection circuit has kicked in and shut the battery down, as that would give 0volts.


    Edit:
    You just made another post where you show it working!!
    Flashlight issues~https://tinyurl.com/bw2d3pd
    DX Return Policy/Warranty~https://tinyurl.com/yb7dpg3s
    New customers read this ~ http://tinyurl.com/3kcyfqm
    Tracking site ~ http://www.17track.net/en
    Posts(17129) | Reviews | Tip post

    mod edited (cyclist) on 6/5/2011 at 11:54 AM
  • Nuppi Sunday, June 5, 2011 2:06 PM Reply
    I tried with a nomal AA too. Still nothing 0.00 on the display.

    The other post with the charger prob i used another multimeter m8.

    Gladly i have 3 of these, sadly 2 of them seems to have problems tho.
    Posts(39) | Reviews | Tip post

    post edited by Nuppi on 6/5/2011 at 2:18 PM
«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere