DX  » Community » Forums
«See all threads (in Product Forum)
Product Forum

SMI Grabber Device - SM-USB 007

  • Sparke2 Wednesday, June 22, 2011 1:03 PM Reply
    Anyone who get this easycap (sm-usb 007) could make it to work? I've tried various drivers, and didn't work, and I got the digitally signed problem too ):

    HELP!
  • LAL Moderator Wednesday, June 22, 2011 1:42 PM Reply
    Forum Mod - *not* DX™ Staff
    ******* Forum Rules: http://dxurl.com/RX4j *******
    How to contact DX --> https://cs.dx.com

    O homem comum fala, o sábio escuta, o tolo discute, o babaca insulta
  • CosmoVitelli Wednesday, June 22, 2011 2:03 PM Reply
    I have this device, too. And it can be a really PITA to get it up and working...
    However, you can try this drivers, they work for me (on XP):

    http://www.mediafire.com/file/17548r88wxapxa7/AF9015.9.6.3.1.zip

    http://www.mediafire.com/file/gb7tlthmhhgbljp/AF9015_BDA_v7.11.20.1_071120.zip

    I found the software delivered with it is also crap, I use VirtualDub for digitizing.

    Regards, Cosmo
    DX - always good for a surprise. ;-)
  • Sparke2 Wednesday, June 22, 2011 4:19 PM Reply
    Not worked ):

    Anybody with windows 7 x64 and this device working? ):
  • LAL Moderator Wednesday, June 22, 2011 7:05 PM Reply
    Forum Mod - *not* DX™ Staff
    ******* Forum Rules: http://dxurl.com/RX4j *******
    How to contact DX --> https://cs.dx.com

    O homem comum fala, o sábio escuta, o tolo discute, o babaca insulta
  • Sparke2 Friday, November 11, 2011 1:58 PM Reply
    After long months, I've tried to use this easycap again. And for my surprise, after plug the device on pc, the windows 7 automatically recognized the easycap and installed the drivers for it!

    I've made some videos and uploaded to youtube.

    http://www.youtube.com/watch?v=z6-om0cwcec
    http://www.youtube.com/watch?v=wmciGEfUgmQ
  • thof1 Sunday, May 06, 2012 11:48 AM Reply
    Just use the drivers from the CD that comes with the product. It works just fine on Windows 7 x64 including audio
  • dxavocado Tuesday, October 23, 2012 6:52 PM Reply
    sku.11267 and sku.5707 use different chips, and therefore different drivers. sku.11267 uses Somagic SMI2021 chipset. Drivers for sku.5707 will not work with the somagic. use the drivers that came with the capture device.
  • dbhopatkar Sunday, April 21, 2013 4:26 AM Reply
    Can somebody please give me sku.11267 drivers. I seem to have lost mine and I am reinstalling my PC. Thanks.
  • Animike420 Saturday, September 26, 2015 6:44 PM Reply
    it works. one- make sure u run correct exe, 2- try to run as administrater. if install fails, disable driver, delete and then re-run aesycap driver disk or driver download if from 3rd party, now if i could get simultanius 4ch recording to work rather than it tuning from channel to 2 then to 3. need all for streaming at once

    img src:


«Reply to this thread (in Product Forum)
Product Forum

Reply

Subject:

* 50 characters max

Message:

Please note: HTML codes are not allowed anywhere on this page (otherwise you will see an error).

Please note that DealExtreme Forums are not a sales or product support board. While we do constantly participate in this forum, please contact us via support ticket for a guaranteed fast response. We make every effort to make the quickest replies.

DX Everywhere