DX » Community » Reviews » JY-MCU Minimum AVR System Board (ATMEGA32)
Customer’s impression:
Create Review

Share your reviews,
photos and videos here!

Sort by
  • Latest Reviews
  • Most Helpful Reviews
  • Pro Reviews First
  • posted bysoli255 on 08/27/2015


    Very easy to use bootloader via USB. If you familiar with AVR mics, then is easy way to use board and develop some code. Now I have several boards with no problem with them.

    0 0

    ViewMore Hide

  • posted byJanDeStrooper on 07/22/2013

    Very simple and easy programming over USB. Use the BooloadHID from http://vusb.wikidot.com/project:hidbootflash In combination with the MCSELEC AVRBASCOM the ideal package to learn programming µControllers. The flatcable connection is in the center where it could either make the led's or the... Read more

    1 0

    ViewMore Hide

  • posted bytboysen on 12/04/2012

    The board comes with an Atmega32 running on 16MHz, complete with screws and spacers. The Controller is preloaded with a USB bootloader, that implements a HID USB device (VendorID 16C0, ProductID 05DF), so no drivers are needed with windows. It seems to be BootloadHID, AVRUSBBoot or equivalent. It... Read more

    5 0

    ViewMore Hide

  • posted byJanDeStrooper on 08/17/2012

    You need to download the Bootloader from the webpage http://www.obdev.at/products/vusb/bootloadhid.html in order to program any compiled HEX file into the microcontroller. Much easier you can't work. If you want to rewrite the program, press the RST and F1 and hold the F1 a little longer. Led D1... Read more

    2 0

    ViewMore Hide

  • posted bynerovatt on 01/13/2012

    Great little thing! Leds, buttons and all pins avaliable is perfect for small projects.. LED1 is connected to PINB7, LED2 to PINB6 and so on.. that means you may have to reverse the output in programming. No screws included. Strange ISP-connector.. ATmega32L operates in 2,7-5,5V and the 3,3V up a... Read more

    2 0

    ViewMore Hide

  • posted bywinney on 01/02/2012

    PCB board quality is well. It could be powered direct from USB. It has onboard 3.3v power seurce so You can use it in low voltage applications. Most of IO could be used in your application. It also has 4 buttons and 8 indicator LEDs. It has software USB bootloader, so You just need mini-USB cable... Read more

    5 3

    ViewMore Hide

DX Everywhere