Customer’s impression:
Nice flashlight fit nicely in hand dont' remember last position
Create Review

Share your reviews,
photos and videos here!

  • Pretty good flashlight

    posted by Albertosoto on 02/13/2011

    Involvement:General (knows how to use it) - Ownership:more than 1 month



    +versatile: 1XAA (14500/Alkaline/NiMH) or 2XAA (Alkaline/NiMH)

    +modes starts on med, not high.

    +small enough for EDC

    +glass lens and aluminium reflector

    +good compromise between flood and throw

    +proper SOS mode, not like older C3's SOSOSO...


    -no O-Ring on lens

    -ugly solder (X2) on pill sides (to make contact with body for negative)

    -ugly solder on centre of pill (for positive)

    -due this last bloop of solder, the batery fits too tight (short) when using protected 14500

    -A clip would be really nice on this.


    Excellent flashlight. Using it at work everyday.

    The modes are very apreciate when using it indoors. It starts on MED, tab the click and you get LOW -> HIGH -> STROBE -> SOS

    If you use Li-ion 14500, you will apreciate the starting MED mode, good output and saving runtime.

    It only gets warm when using 14500 on high for more than 10 minutes.

    Runtime is good on HIGH, about an hour and a half for the 1XAA combination. With 2XAA you will get the same output but longer runtime, but I didn't measured it becouse I don't use the extension tube.


    2XAA combination NOT for 14500's!!! You'll burn the driver if you do that! Only for alkalines/NiMH!!!


    A few issues with contacts, mainly because of the solder bloops on the pill that deteriorates everytime you unscrew the head. Change your cells from the tailcap ;)

    Order a 19mm o-ring or get it locally and it will be waterproof.


    This small and inexpensive light will make look your good old maglites like a joke.

    Order a 19mm o-ring or get it locally for lens and it will be waterproof.

Post comment

DX Everywhere