This mount is a good quality and definitely will last for a long time. The only concern I have is, that in the title there is a "2-pack" phrase. I would expect two mounts to be included in the package. But there was only one.
Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Maybe side of plates can rounded. it can be sharp
Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny You...
Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Maybe side of plates can rounded. it can be sharp
Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight
Read more
Firmly holds a flash-light, even on tapered barrels.
Works well with small flash-lights, but can only connect to the barrel of the rifle, unless you have a very thin flash-light.
Well made and can be tightened to the point where it is very robust to recoil. Can only attach to the barrel of the to...
Firmly holds a flash-light, even on tapered barrels.
Works well with small flash-lights, but can only connect to the barrel of the rifle, unless you have a very thin flash-light.
Well made and can be tightened to the point where it is very robust to recoil. Can only attach to the barrel of the rifle. Too small to mount to scopes, even small ones like SKU: 6280.
Only works with small flash-lights (+-20mm diameter). The fitting is asymmetrical. The smaller side, that attaches to the barrel, can be adjusted to fit between approximately 10-20 mm and the bigger side can be adjusted to between approximately 15-30 mm.
As it hinges in the middle, the one side gets smaller as the other gets bigger. A good buy if you want to attach a flash-light to your barrel.
Read more
Very good stell mount for you pesonal rifle ) Good qality of steel, good complectation. And very cheap! You can use it to hold flashlights, lasers, any tactical stuffs etc.
And, wow! you get TWO of them when you order. Did not found any con on this peace of metal. It works and holds tight.
PS: or...
Very good stell mount for you pesonal rifle ) Good qality of steel, good complectation. And very cheap! You can use it to hold flashlights, lasers, any tactical stuffs etc.
And, wow! you get TWO of them when you order. Did not found any con on this peace of metal. It works and holds tight.
PS: meanwhile, dont tighten too much the screws or you can mark your gun. I used this to mount my UltraFire WF-501B to my airsoft CYMA AK-74. Works fine for the purpose.
Read more
This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. It takes some dexterity to line up...
This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. It takes some dexterity to line up the two ends of the mount, but it seems easiest to use when opened to its widest setting. Does not have any coating inside the mounts: if you are mounting this metal-on-metal, you might consider putting a soft material (like leather) between mount and the mounted surface. Good deal for the price. Can not complain. I myself use it to attach a green laser sight to a scope on my air rifle. In one of the ring i attach the scope and on the other I attach the laser sight. The mount hold every part tight and so far it worked out great.
Read more
Can be adjusted to fit almost any handheld flashlight. Best part is that you get two of them when you order. If you need to attach a flashlight to anything, use this mount since it's so easy to adjust. So far, I haven't noticed anything wrong with this product. I look forward to using this mount...
Can be adjusted to fit almost any handheld flashlight. Best part is that you get two of them when you order. If you need to attach a flashlight to anything, use this mount since it's so easy to adjust. So far, I haven't noticed anything wrong with this product. I look forward to using this mount with my flashlight on the job. I've been looking for a mount so I could mount my flashlight to my fire helmet. Before I found this, all the stores I was going to had something that would work but wanted $30 for it. At this price, you can't beat it. Great product for a great price. I highly recommend this product to anyone who would need to have a hands free flashlight.
Read more
- Works like a charm for connecting anything to anything else!
- Very attractive, though shiny, finish.
- Seem extremely sturdy. - Slightly crooked, but nothing that really matters at normal flashlight-ranges (you can't mount a laser and expect it to be even remotely straight) They certainly but...
- Works like a charm for connecting anything to anything else!
- Very attractive, though shiny, finish.
- Seem extremely sturdy. - Slightly crooked, but nothing that really matters at normal flashlight-ranges (you can't mount a laser and expect it to be even remotely straight) They certainly aren't advanced, but they are exactly what they're made out to be, and will probably come in handy in many new ways over the years. You probably need these for something, whether you know it or not.
Read more
This will fit almost anything to your gun. They can be used to hold scopes, flashlights, lasers and almost anything that complains the size and application limitations.
They are very cheap for the use.
You can use directly on the barrel to hold flashlights and laser pointers that will be very and...
This will fit almost anything to your gun. They can be used to hold scopes, flashlights, lasers and almost anything that complains the size and application limitations.
They are very cheap for the use.
You can use directly on the barrel to hold flashlights and laser pointers that will be very secure and tightly.
They come with good allen tools. Dont tighten too much the screws or you can mark your gun. You really needs one of this. If you dont use it right now, they certainly helps you in a foward situation
Read more
This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. Not sure about previous reviews,...
This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. Not sure about previous reviews, probably the quality was improved since those time, mine is just excellent. Did not found any con on this peace of metal. It works and holds tight. I'm happy with this thing and will buy more for re-sell. My customers are interested in it. Fine made mount. It's cheap and durable. If you can wait for delivery then buy it. Such mount will cost much more in your gun shop.
Read more
You can't beat the price for this Universal Flashlight Mount. Then you get two of them and shipped free, it just gets better. Perfect fit for my SureFire 6P and weapon mounting. Easy installation with included Allen Wrench. Received one wrench for each mount. Perfect fit on gun barrel. May fit a...
You can't beat the price for this Universal Flashlight Mount. Then you get two of them and shipped free, it just gets better. Perfect fit for my SureFire 6P and weapon mounting. Easy installation with included Allen Wrench. Received one wrench for each mount. Perfect fit on gun barrel. May fit a Picatinny Rail. Can twist on barrel; further tightening to prevent twisting may deform center of bracket inward. This is not as sturdy as a regular scope mount. This is going to mar the finish on my Parkerized gun barrel, as it would with a Blued barrel. It would be nice if a piece of thermal stable, high friction plastic, was included with the set. For my use, Gloss Black finish will need to be repainted to a Flat Black finish. If you're looking for an inexpensive system to mount a tactical light on a rifle, this would be a good start. I'd like to see something like this for a 12-Guage shotgun barrel. Go ahead and get one to get started with. You won't beat the price.
Read more
Impression:Quality;
This mount is a good quality and definitely will last for a long time. The only concern I have is, that in the title there is a "2-pack" phrase. I would expect two mounts to be included in the package. But there was only one.
0 0
ViewMore
Hide
Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Maybe side of plates can rounded. it can be sharp Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny You... Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Maybe side of plates can rounded. it can be sharp Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Very nice design, very light, Also it plated with black powdered paint . It is not shine on sunny days. You can easly attach laser or flashlight Read more
0 0
ViewMore
Hide
Firmly holds a flash-light, even on tapered barrels. Works well with small flash-lights, but can only connect to the barrel of the rifle, unless you have a very thin flash-light. Well made and can be tightened to the point where it is very robust to recoil. Can only attach to the barrel of the to... Firmly holds a flash-light, even on tapered barrels. Works well with small flash-lights, but can only connect to the barrel of the rifle, unless you have a very thin flash-light. Well made and can be tightened to the point where it is very robust to recoil. Can only attach to the barrel of the rifle. Too small to mount to scopes, even small ones like SKU: 6280. Only works with small flash-lights (+-20mm diameter). The fitting is asymmetrical. The smaller side, that attaches to the barrel, can be adjusted to fit between approximately 10-20 mm and the bigger side can be adjusted to between approximately 15-30 mm. As it hinges in the middle, the one side gets smaller as the other gets bigger. A good buy if you want to attach a flash-light to your barrel. Read more
0 0
ViewMore
Hide
Very good stell mount for you pesonal rifle ) Good qality of steel, good complectation. And very cheap! You can use it to hold flashlights, lasers, any tactical stuffs etc. And, wow! you get TWO of them when you order. Did not found any con on this peace of metal. It works and holds tight. PS: or... Very good stell mount for you pesonal rifle ) Good qality of steel, good complectation. And very cheap! You can use it to hold flashlights, lasers, any tactical stuffs etc. And, wow! you get TWO of them when you order. Did not found any con on this peace of metal. It works and holds tight. PS: meanwhile, dont tighten too much the screws or you can mark your gun. I used this to mount my UltraFire WF-501B to my airsoft CYMA AK-74. Works fine for the purpose. Read more
0 0
ViewMore
Hide
This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. It takes some dexterity to line up... This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. It takes some dexterity to line up the two ends of the mount, but it seems easiest to use when opened to its widest setting. Does not have any coating inside the mounts: if you are mounting this metal-on-metal, you might consider putting a soft material (like leather) between mount and the mounted surface. Good deal for the price. Can not complain. I myself use it to attach a green laser sight to a scope on my air rifle. In one of the ring i attach the scope and on the other I attach the laser sight. The mount hold every part tight and so far it worked out great. Read more
1 0
ViewMore
Hide
Can be adjusted to fit almost any handheld flashlight. Best part is that you get two of them when you order. If you need to attach a flashlight to anything, use this mount since it's so easy to adjust. So far, I haven't noticed anything wrong with this product. I look forward to using this mount... Can be adjusted to fit almost any handheld flashlight. Best part is that you get two of them when you order. If you need to attach a flashlight to anything, use this mount since it's so easy to adjust. So far, I haven't noticed anything wrong with this product. I look forward to using this mount with my flashlight on the job. I've been looking for a mount so I could mount my flashlight to my fire helmet. Before I found this, all the stores I was going to had something that would work but wanted $30 for it. At this price, you can't beat it. Great product for a great price. I highly recommend this product to anyone who would need to have a hands free flashlight. Read more
0 0
ViewMore
Hide
- Works like a charm for connecting anything to anything else! - Very attractive, though shiny, finish. - Seem extremely sturdy. - Slightly crooked, but nothing that really matters at normal flashlight-ranges (you can't mount a laser and expect it to be even remotely straight) They certainly but... - Works like a charm for connecting anything to anything else! - Very attractive, though shiny, finish. - Seem extremely sturdy. - Slightly crooked, but nothing that really matters at normal flashlight-ranges (you can't mount a laser and expect it to be even remotely straight) They certainly aren't advanced, but they are exactly what they're made out to be, and will probably come in handy in many new ways over the years. You probably need these for something, whether you know it or not. Read more
0 0
ViewMore
Hide
This will fit almost anything to your gun. They can be used to hold scopes, flashlights, lasers and almost anything that complains the size and application limitations. They are very cheap for the use. You can use directly on the barrel to hold flashlights and laser pointers that will be very and... This will fit almost anything to your gun. They can be used to hold scopes, flashlights, lasers and almost anything that complains the size and application limitations. They are very cheap for the use. You can use directly on the barrel to hold flashlights and laser pointers that will be very secure and tightly. They come with good allen tools. Dont tighten too much the screws or you can mark your gun. You really needs one of this. If you dont use it right now, they certainly helps you in a foward situation Read more
0 0
ViewMore
Hide
This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. Not sure about previous reviews,... This is really good and very useful mount. You can use it in a different ways, so it is going to be your universal accessory for large variety of needs. Holds fine on a barrel and hold which ever you like pretty tight. It is well build and looks and feels solid. Not sure about previous reviews, probably the quality was improved since those time, mine is just excellent. Did not found any con on this peace of metal. It works and holds tight. I'm happy with this thing and will buy more for re-sell. My customers are interested in it. Fine made mount. It's cheap and durable. If you can wait for delivery then buy it. Such mount will cost much more in your gun shop. Read more
0 0
ViewMore
Hide
You can't beat the price for this Universal Flashlight Mount. Then you get two of them and shipped free, it just gets better. Perfect fit for my SureFire 6P and weapon mounting. Easy installation with included Allen Wrench. Received one wrench for each mount. Perfect fit on gun barrel. May fit a... You can't beat the price for this Universal Flashlight Mount. Then you get two of them and shipped free, it just gets better. Perfect fit for my SureFire 6P and weapon mounting. Easy installation with included Allen Wrench. Received one wrench for each mount. Perfect fit on gun barrel. May fit a Picatinny Rail. Can twist on barrel; further tightening to prevent twisting may deform center of bracket inward. This is not as sturdy as a regular scope mount. This is going to mar the finish on my Parkerized gun barrel, as it would with a Blued barrel. It would be nice if a piece of thermal stable, high friction plastic, was included with the set. For my use, Gloss Black finish will need to be repainted to a Flat Black finish. If you're looking for an inexpensive system to mount a tactical light on a rifle, this would be a good start. I'd like to see something like this for a 12-Guage shotgun barrel. Go ahead and get one to get started with. You won't beat the price. Read more
0 0
ViewMore
Hide