tried to use it on a 2 wire motor and works well but you need to connect in a 2 channel relay to make it reverse. works perfect on a 3 wire reversable motor. the only thing i did not like is it has a power delay and does not stop the motor exactly when buttons are released.
Black minus, Red positive 12Vdc, White 12Vdc positive = As long as OUT button pressed down. Yellow 12Vdc positive = As long as IN button pressed down. Green = antenna Greetings
Remote has good english description and quality is very good. Receiver came in a blank cardboard box with no instructions and is just a black sealed box with colored wires coming out. Fairly easy to figure out. The unstripped one was aerial. Red and Black is +-12VDC other three wires form a open...
Remote has good english description and quality is very good. Receiver came in a blank cardboard box with no instructions and is just a black sealed box with colored wires coming out. Fairly easy to figure out. The unstripped one was aerial. Red and Black is +-12VDC other three wires form a normally open pair to common allowing simple interface to control solenoid.
Read more
Pros: Easy-to-install, it took 10 minutes to install parallel to my in-car winch controls. Helps a lot, when you're alone. You can control it from anywhere. If you need more control at the hook - remote control will be very helpful. Cons: It is not waterproof, so you have to use a waterproof bag...
Pros: Easy-to-install, it took 10 minutes to install parallel to my in-car winch controls. Helps a lot, when you're alone. You can control it from anywhere. If you need more control at the hook - remote control will be very helpful. Cons: It is not waterproof, so you have to use a waterproof bag for it. However you don't need to take it off the bag. Unfortunately the time of minimum click is quite big, about 2/3 of seconds, so you won't be able to precisely winch/unwinch. Even if you click the button for 1/10 sec, the winch will go up for about 2/3 to 3/4 seconds. No wiring instruction included. however the color scheme on the wires is pretty obvious. I didn't even googled it, just used colors.
Read more
The reciever looks like sealed with glue, transmitter is not sealed but is robust and easy to control in gloves. There is On/OFF switch to control power to transmitter for preventing unmeand operation. Reciever takes really small amount of power on standby 1-2mA so can be powered steadily. The is...
The reciever looks like sealed with glue, transmitter is not sealed but is robust and easy to control in gloves. There is On/OFF switch to control power to transmitter for preventing unmeand operation. Reciever takes really small amount of power on standby 1-2mA so can be powered steadily. The is no manual about the wiring. So I add this wiring from Forum users Otris and Wallc White = In/Out 12V +
Yellow = Out/In 12V +
Red = 12V + (positive)
Little red = program cable for next transmitter when grounded
Black = 12V - (negative)
Blue = Antenna Minimum signal lenght when is button presed quickly 1-1,5sec or how long you keep button pressed. My freinds love it so I order next a few pcs.
Read more
Impression:Great!;
Great price for this item. Works great. Took a little longer to get here.
19 0
ViewMore
Hide
Impression:There's no instruction to use.;
tried to use it on a 2 wire motor and works well but you need to connect in a 2 channel relay to make it reverse. works perfect on a 3 wire reversable motor. the only thing i did not like is it has a power delay and does not stop the motor exactly when buttons are released.
0 0
ViewMore
Hide
Impression:Great!;
Black minus, Red positive 12Vdc, White 12Vdc positive = As long as OUT button pressed down. Yellow 12Vdc positive = As long as IN button pressed down. Green = antenna Greetings
3 0
ViewMore
Hide
Impression:Impressive;
Remote has good english description and quality is very good. Receiver came in a blank cardboard box with no instructions and is just a black sealed box with colored wires coming out. Fairly easy to figure out. The unstripped one was aerial. Red and Black is +-12VDC other three wires form a open... Remote has good english description and quality is very good. Receiver came in a blank cardboard box with no instructions and is just a black sealed box with colored wires coming out. Fairly easy to figure out. The unstripped one was aerial. Red and Black is +-12VDC other three wires form a normally open pair to common allowing simple interface to control solenoid. Read more
0 0
ViewMore
Hide
Impression:There's no instruction to use.;
Price is good. There's no instruction. We need to guess the meaning of the wire colors. Lack user manual.
0 0
ViewMore
Hide
Impression:Great!;
Pros: Easy-to-install, it took 10 minutes to install parallel to my in-car winch controls. Helps a lot, when you're alone. You can control it from anywhere. If you need more control at the hook - remote control will be very helpful. Cons: It is not waterproof, so you have to use a waterproof bag... Pros: Easy-to-install, it took 10 minutes to install parallel to my in-car winch controls. Helps a lot, when you're alone. You can control it from anywhere. If you need more control at the hook - remote control will be very helpful. Cons: It is not waterproof, so you have to use a waterproof bag for it. However you don't need to take it off the bag. Unfortunately the time of minimum click is quite big, about 2/3 of seconds, so you won't be able to precisely winch/unwinch. Even if you click the button for 1/10 sec, the winch will go up for about 2/3 to 3/4 seconds. No wiring instruction included. however the color scheme on the wires is pretty obvious. I didn't even googled it, just used colors. Read more
0 0
ViewMore
Hide
The reciever looks like sealed with glue, transmitter is not sealed but is robust and easy to control in gloves. There is On/OFF switch to control power to transmitter for preventing unmeand operation. Reciever takes really small amount of power on standby 1-2mA so can be powered steadily. The is... The reciever looks like sealed with glue, transmitter is not sealed but is robust and easy to control in gloves. There is On/OFF switch to control power to transmitter for preventing unmeand operation. Reciever takes really small amount of power on standby 1-2mA so can be powered steadily. The is no manual about the wiring. So I add this wiring from Forum users Otris and Wallc White = In/Out 12V + Yellow = Out/In 12V + Red = 12V + (positive) Little red = program cable for next transmitter when grounded Black = 12V - (negative) Blue = Antenna Minimum signal lenght when is button presed quickly 1-1,5sec or how long you keep button pressed. My freinds love it so I order next a few pcs. Read more
21 0
ViewMore
Hide