Customer’s impression:
better than expected good light distribution keeps SSC P7 cool
Create Review

Share your reviews,
photos and videos here!

  • Very tight beam

    posted by Packhorse on 07/03/2008

    Involvement:General (knows how to use it) - Ownership:1 day to 1 week


    This reflector offers an extreamly tight beam. Better than a 8deg MR16 or 6deg 10w HID when used with a P7 LED.

    The copper base can be unscrewed and you can mount a bare emitter to it.

    The base and reflector then act as a heatsink though I think you will also need more heat sinking.


    To get it to mount in a mag head flush you need to grind/machine down the lip. It took me 30 minutes with a dremel and sandpaper.

    Be carefull that it does not get too hot as it seems to be coated and this may blemmish.

    This then allowed me to use 2 x 1.8mm glass lenes.

    Short range it does give a slight donut effect but its not a problem


    Very very good choice for a mag dive light conversion.

    Im happy.

Post comment

DX Everywhere