DX » Community » Reviews » CRIUS ALL IN ONE PRO v1.0 Multiwii & Megapirate Flight Controller
Customer’s impression:
creio Que É exelente Pelos comentarios
Create Review

Share your reviews,
photos and videos here!

Sort by
  • Latest Reviews
  • Most Helpful Reviews
  • Pro Reviews First
  • posted bymoises37771 on 09/27/2014

    antes de comprar,pesquisei muito,e tenho visto que é uma das mais completas,bom preço,e qualidade,dx o melhorque conheci até agora

    Impression:Pelos comentarios, creio Que É exelente;

    0 0 0

  • posted byJbotMonkey on 03/17/2013

    Supports excellent firmwares (Multiwii/MegaPirate Awesome stability and control can be achieved. Price Came with broken or missing bootloader which means that unless you have an AVR ISP programmer, some header pins, know where to solder those pins onto the board and how to re-burn the bootloader... Read more

    2 0 3

  • posted bylarppaxyz on 02/04/2013

    Has all sensors you would need. Plenty of information about this on internet. Runs and works with Megapirate NG (2.8+). Comes with bunch of wires to connect additional boards. Connectors are marked well. Unless you know what you are doing it can be hard to setup. Basically this Arduino Mega, so... Read more

    0 0 0

  • posted bymichi1g on 12/04/2012

    cheap enough sensors tri up to octocopter possible MultiWii and MegaPirateNG flashable USB & FTDI Port enough ports for everything you need on a Copter USB Port breaks off too easy (Can still be programmed via FTDI) I have two of these. One with MultiWii and one with MegaPirateNG. First one I... Read more

    0 0 3

  • posted bycrx4ever on 10/26/2012

    all most recent sensor is on this board! barometer is just too nice compare to the old BMP085. rely good design nothing to say on this , and for the price it's just perfect.. all connection are nice they minimize the number of wire to get everything working pay attention to usb port, very 2 there... Read more

    0 0 3

  • posted byForting on 10/05/2012

    It works! good soldering, small size, excellent selection of sensors (gyroscopes, accelerometers, magnetometers and baro) and ports, including a port USB. For this price, the perfect choice for building multicopter. Weak connector USB - breaks off from the board, you must use the USB cable There... Read more

    0 0 5

  • posted byLocoVeleta on 10/03/2012

    You can use the mission planner with the ardupirateNG (i tried v2.7 r4), spending much less money than buying APM (v1 250usd, v2 200usd). Multiwii 2.1 also works fine. Full of documentation on the web, to get your drone work! You have to put epoxy glue in both sides of the usb, because it is easy... Read more

    0 0 3

DX Everywhere