Pros : Precise and very easy to setup an to use. I use it to setup my saws (circular and scroll saws) accurately and to very ferify angles of cuts. very usefull on may little Proxxon machine tools. comes with battery and a little pouch. Works out of the box. Cons : seriously, none !

Very useful! I use this bevel box for about every job you would normally get out the builders level. I also use it to adjust my miter saw to the right (90 degree or any other angle).Just place it on the working surface of your mitersaw,set the bevel box to zero and then place it with the build-in... Very useful! I use this bevel box for about every job you would normally get out the builders level. I also use it to adjust my miter saw to the right (90 degree or any other angle).Just place it on the working surface of your mitersaw,set the bevel box to zero and then place it with the build-in magnets to the lower end of the saw blade, adjust to the right angle of your mitersaw,ready! For leveling:Once set accurately to zero on the level point, this instrument is very accurate. You can check this on a level surface by turning the bevel box 180 degrees on its standing axis, it should get you the same(zero degrees on level surface) readings both sides. non really, or it should be its jacket is a bit tight in the beginning, but that can also be useful. Also price could be better but is still not expensive for what you get. display light could be very useful if working in tight and darkened spots. Also hold function (I think there is a other model with that function SKU: 148892 but is a loth more expensive).Should also be useful if it had a separate function to remember the level setting, so you can use the zero setting for other measurements. value for money, good quality build. Read more