Involvement:Expert (understands the inner workings) - Ownership:1 day to 1 week
Good design, quality materials, full equipment - use out of the box. Good time work.
Poor thermal interface LEDs - needs tweaking, falls off plug sockets charge (treated with a drop of glue), voltage drop of 0.3 V to the wire. ?harge control in the lamp is not, the termination charge is looking adapter that gives some reason no load 4.55 V, which is not good - can not be left unattended but, use correct external charger.
LED transplanted at 2 screws on thermal grease. Driver line, the battery - parallell. Smooth reflector, the beam is narrow, flat spot in the center, with a clear boundary, stands out from the Backlight Light is not strong. Until declared on DX 868lm far, on site to the photo of the box easy to read "350lm" :D Construction: in the head LED and button, three-core twisted wire to bat. box, the controller in it. Current: Hi - 1.5A., Lo - 0.3A. On the wire voltage drop. 0.3 V. I do not know whether it makes sense to change, it shall be flexible and soft. For wires from the battery to the controller board - falling 0.1 V., easy fix. In board - two chip SO8, one labeled CX2812 - controller, a second - MEM2309 - seems mosfet. Mode is stored - after replacing the batteries last is.
For all the shortcomings of bad light, it is worth to buy. Buy him a good charge to 18650, and you will be happy.Sorry for my English, I use Google translator.
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.