Involvement:Expert (understands the inner workings) - Ownership:less than 1 day
Inexpensive Easily modified to fit a case Works
I've attached pictures on how to make this work with a case, essentially the plug doesn't stick out far enough so by popping the case open (from the bottom) and shaving off a little bit of the upper support (I used a sharp chisel) you can push the plug up higher out of the dock.
You also need to SLIGHTLY widen the opening for the dock connector mount to fit through (its the little white part at the bottom of the connector)
Buy it, its cheap and works with a thin case. I don't think it would work with an otter box but with a bumper or thinner case it works great.
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.