• 5 star 7 ( 70% )
  • 4 star 3 ( 30% )
  • 3 star 0 ( 0% )
  • 2 star 0 ( 0% )
  • 1 star 0 ( 0% )
Customer’s impression:
There are no customer's impression yet.
Create Review

Share your thoughts and
Get DX Points!

  • They work well and are simple to use

    posted by Cheater512 on 04/02/2008

    Involvement:Expert (understands the inner workings) - Ownership:less than 1 day


    Dead simple to use and they seem to work fine.

    They dont get very warm while in use.
    I only noticed a slight temperature increase.


    I had to guess the pin out. Fortunately I guessed correctly.

    The center connection is GND for both power in and the LED.

    The outer ring is + for power in.

    The positive terminal for the LED is on the missing IC's place and is a large round circle on the PCB.

    The wires arent soldered on out of the box.

    Its a trivial thing though and its easy to solder them on.


    I'm powering mine from a 5v 1A switching regulator.

    Someone might be interested in that.


    I've had no problems with them.

    If you have a few high powered LEDs you need to power then grab them.

Post comment


Get great weekly deals and offers like: Collections