Involvement:Expert (understands the inner workings) - Ownership:1 week to 1 month
The threads are decent and the anodizing is good. The reflector and glass are clean.
While the light is bright at first it quickly dims. I thought this was just a bad light so dx sent me another one and it had the same problem. I took out the led and found the problem. To keep the led base from shorting out to the light housing they stuck a piece of plastic between the led and pill and this does not allow the heat to dissipate and thus the led dims because of over heating. I took both lights apart and used some thermal tape to Isolate the led and it is much better now. The piece of plastic looks different in both lights and it look like a piece cut out from a isolater that fits between the led and reflector to keep it from shorting out.
Not sure how long the led will last if you don't modify the heat sink. The led should have been on a isolated round or star board then installed and but it's not.
I don't suggest anyone buy this unless you plan on modding it.
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.