DX » Community » Reviews » ZnDiy-BRY U-301 Electromagnetic Parking Sensor - Black
Customer’s impression:
perfect Average Excellent idea! works great but no display warning
Create Review

Share your reviews,
photos and videos here!

Sort by
  • Latest Reviews
  • Most Helpful Reviews
  • Pro Reviews First
  • posted byceroulix on 06/15/2015

    pros: cheap, easy to install and acurate cons: when in heavy rain sometimes it bips constanly as if you are aready agaist something thoughts: excelent parking sensor for the price and it does its job

    Impression:perfect;

    0 0 0

  • posted bynikolafi82 on 12/26/2014

    Pros: loud beeper, easy installation, it detects everything that comes in range Cons: the magnetic tape needs to be positioned precisely, because it emits signal in a cone shape and if you point it a little bit towards the ground it will not work as it should (that's actually my mistake), it to... Read more

    Impression:perfect;

    0 1 1

  • posted byrklauco on 09/28/2014

    Pros: - very cheap!, especially comparing to ultrasound options - reliable - easy to install, no drilling needed Cons: - none at all Installation instructions: - un-mount the rear bumper (usually just a few screws) - clean the interior surface of the bumper, remove any dirt, grease, etc. (I used... Read more

    Impression:Excellent idea!;

    0 0 0

  • posted byYAPAVEMU on 09/22/2014

    The price is really good for what you get. You definately need an expert to install and of course dismantle the whole bumper. The noise you get from the sensor is very clear however the level of sensitivy is very low. You have to be close to an obstacle at around 50cm in order to get a beep and I... Read more

    Impression:Average;

    0 0 0

  • posted byxpertechmu on 08/16/2014

    works very nicely but no display alert , only alert by noise. Tested it in my car , i used tapes to mount it , just to test how useful it is . It should be placed in the inside surface of the bumpers , generally you will have to remove your car bumper then put it so that it sticks well. Please no... Read more

    Impression:works great but no display warning;

    0 0 0

  • posted bypepehillo on 04/04/2014

    easy to instal and to use, a small module , a wired buzzer and one adhesive foil working like a anntena. is very useful for cars with plastic bumpers, reinforcement of metal behind the plastic will make to the car body to work like a big anntena, triggering the system if you touch any part of the... Read more

    0 0 0

  • posted bymaenishi on 02/03/2014

    It's cheap and does not require holes in the bumper, is very small and easy to hide. Operation is simple and intuitive. It is discrete and does not need a display on the dashboard. You need to remove the bumper to install the sensor and the connector is very fragile. Care must be taken to avoid a... Read more

    0 0 0

  • posted byDjBr1 on 11/19/2013

    Without doubt, the best way to prevent damage to the bumpers of our cars. It's invisible and it works perfect. This is the second I buy because the first broke the antenna to try to remove the front bumper. I am delighted with it. Unlike other systems, this is invisible and has high volume to the... Read more

    1 0 12

WHY CHOOSE DX.COM?

  • Over 200,000 products
  • Extremely low prices
  • Timely refunds and replacements
  • Worldwide free shipping

Subscribe to our newsletter: