Impression:good;

Pros: The test clip is good and shiping was fast. :) Cons: -

Impression:perfect;

Maybe the best thing I ever purchased in DX. I use it each time I've to analyse a electronic circuit. Very easy to use, and strong, this is perfect !

Impression:circuit, clips;

Probably not work for surface mount chips. Tips are a little too big. But clip great spread around board.

Impression:good;

I like the yellow color which stands out from a PCB. Unfortunately the clips are not very strong and can easily jump off an IC pin when moved even slightly. That can be fixed with some ducttape though. Overall I would say this sort of kit is a nearly indispensable addition to your logic analyzer.

Impression:Useful;

Pros: Tiny little test clips for making connections in tight places. Cons: Test points are rather flimsy and require a bit of fiddling initially to reassemble them after shipping. The test points themselves are of 2 parts that come apart during shipping and handling. A gentle realignment gets I I... Pros: Tiny little test clips for making connections in tight places. Cons: Test points are rather flimsy and require a bit of fiddling initially to reassemble them after shipping. The test points themselves are of 2 parts that come apart during shipping and handling. A gentle realignment gets them back together. Other Comments: I purchased these clips to attach to the FTDI connectors on Arduino Pro Minis so that I did not have to solder on the headers. This way I can mount the boards in tighter places without worrying about the 6 pin headers getting in the way. Just connect the clips to an FTDI programmer and temporarily connect them to the the Pro Mini. Upload the program then remove the clips and you are done. Read more

Impression:Useful;

Pros: Tiny little test clips for making connections in tight places. Cons: Test points are rather flimsy and require a bit of fiddling initially to reassemble them after shipping. The test points themselves are of 2 parts that come apart during shipping and handling. A gentle realignment gets I I... Pros: Tiny little test clips for making connections in tight places. Cons: Test points are rather flimsy and require a bit of fiddling initially to reassemble them after shipping. The test points themselves are of 2 parts that come apart during shipping and handling. A gentle realignment gets them back together. Other Comments: I purchased these clips to attach to the FTDI connectors on Arduino Pro Minis so that I did not have to solder on the headers. This way I can mount the boards in tighter places without worrying about the 6 pin headers getting in the way. Just connect the clips to an FTDI programmer and temporarily connect them to the the Pro Mini. Upload the program then remove the clips and you are done. Read more