Wish
Customer’s impression:
great handy NicePrice Useful for RC models Works if you have instructions
Create Review

Share your reviews,
photos and videos here!

  • Works well but needs instructions

    posted by TrinityTrip54 on 04/16/2018

    Impression:Works if you have instructions;

    22
    Pros: Compact. Light.
    Cons: Flimsy cover. No instructions. Seems to be jerky when running with ESC module.
    Overall: Handy piece to test 3 phase motors. Don't expect smooth operation. Good for go/no-go test. Works for what is intended.
    Tips to get started:
    *The top markings are for each servo you want to test. S1=Servo1 S2=Servo2 etc.
    *Make sure your voltage (marked + and - on the side) does not go over the rated 4.5-6V. You will fry your tester. If you are using a ESC (e.g SKU: 413446) make sure the voltage out on the small 3 way connector is not over 6V. Otherwise power the tester from a separate power supply.
    * If you use an ESC and it is powering a motor make sure the voltage out of the control lines is in spec.
    *It does not work smooth and there is a dead band where it does not start. Turn the knob in Manual mode until about 4 and your motor should start. It only goes until about 6 or so then stops. Very eratic function. Could be ESC/motor/tester combo.

Post comment

DX Everywhere