Involvement:Expert (understands the inner workings) - Ownership:1 week to 1 month
Well fits at the place of the original battery. Better capacity, but I need to make more tests (charge/decharge cycles) A right angle ribbon is as a spare part....(see below)
You will need use a solder iron The right angle ribon is not soldered to the battery and needs a special connector to make dry contact on the internal board of the iPhone (see below my tip)
About the right angle ribbon : the better way is to unsold the original ribbon from the dead battery, and sold it to the new battery; that will give you also the Apple connector which make dry contacts on the board. You just need to know how desold 4 points and sold for points. You can recycle the yellow insulaton tape to place on the fresh solder joints before bend the ribbon.
Be quiet, patient and that works ! Other tip : to remove the upper part of the cabinet, I do not use a spugler, but a succion cup ! You will save a lot of money ( I accept donations ;-))))) - Humor ! -
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.