Customer’s impression:
Create Review

Share your reviews,
photos and videos here!

  • Nice for the price

    posted by ZdenekJi on 08/21/2010

    Involvement:Expert (understands the inner workings) - Ownership:more than 1 month


    Alright, I'm finally writing this review. The instrument gave me mixed feelings because, well, one cannot expect everything perfect for such a low price.
    To start with the advantages, the meter can measure alternating current among others. This is surprising in its class. It also has a rather impressive range of resistance up to 200Mohm. It measures capacity which is useful for the proving of the diagnosis of dried caps.


    Probably the worst were the test leads. They came in a disastrous state where some kind of lacquer insulated them. I had to use rough sandpaper methods to make them work reliably. Next was the capacity connector - the sheet of metal it's made of was bent much. I straightened it.
    During the process, I also noticed drops of solder all over the inside. I threw them away. Last, but not least, there was the plastic stand problem. It was bent. I though a lot of the best approach and finally remembered a trick used for bent heli props: Put it in boiling water. So I boiled the plastic stand for awhile and sure enough it returned to the pristine shape.
    Other than that, I thought it would have had a full 4-figure display instead of the old boring 3+1/2 digit ICL7106 one.
    The continuity beeper stops beeping at around 40ohm (60mV) which is too low to signal a permeable direction of a diode.


    Accurate enough. The apparent leads' resistance problem is lower than in many other meters and is obviously not caused by the leads, but by the distance between the plugs and the bias feed. Buy a 10 times more expensive device if you want to connoise instead of actual measuring.


    If you aren't that wealthy, put this one on your wish list as it will definitely help you progress.

Post comment

DX Everywhere