Customer’s impression:
Cheap great cheap tip
Create Review

Share your reviews,
photos and videos here!

  • Took a chance. Meh...

    posted by edewitt on 10/27/2010

    Involvement:Expert (understands the inner workings) - Ownership:1 day to 1 week


    None, really. Cheaply made.


    Wasn't sure what a "standard" soldering iron was, but mine was not it! This is NOT THREADED, simply a smooth bore. A 5/32 drill bit (just under 0.4 mm) is a slightly loose slip fit - not tight enough to hold.


    I ordered this one, they sent the curved one. No matter, didn't fit anyway. I did easily turn the curved one straight with a little hammer work. That was before I figured out it didn't fit anyway!


    Don't buy unless you know you have the soldering iron this was designed to fit.

Post comment

DX Everywhere