-The LED light has an very nice warm colour.
-Aluminium housing is realy sturdy.
-Low power consumtion.
-Good enough quality to be well worth the price. -The solder points is not very good and the wire is really short. Had to re solder longer wires.
-Only way to mount them is with glue. Would be easier with some holes for screws. Ordered ten and they ... Read more
It gives a lot of white light, no blueish tint. Current consumption is appr. 700mA but it is easily controlled by a LED dimmer.
The LED strip and the Alu shell, can be sawed up, to make 2 or 4 or 6 single strips.
There is a good spread on the light, gives a nice even light. There are no holes for installing it.
The LED strip sits securely but loosely ... Read more
Very nice lighting string which works with any kitchen design and comes assembled in an angle that lights what you need and not your face. Also useful for any other under-the-cabinet lighting use. I connected two of these with one 10W LED Driver (85~265V) SKU: 81475 and it lights up instantly, gives the right amount of light and does not heat up even ... Read more
The Led strip has 36 light sources, and it gives a very good light picture with very little shade if you work in the light, for example, if you use the lighting to the sink in the kitchen. I soldered together three strips that gave 1.5 meter long light source in the the kitchen. I mounted hot melt over the contacts so that no steam can get between the ... Read more
Lights are bright, easy to work with, fits great as a night light. Provides a nice ambient light. Low power consumption Solder points are lacking quality. You will want to reinforce or replace them. This light is sold with bare wires... It is not waterproof which can be a downside depending of what you intend to use it for. None that i can think of ... Read more
Lights are bright, consistent, thin (when removed from Alu enclosure), easy to work with. Reasonable power draw too, which is great. Solder points where the wire connects are poor quality. I used copper braid to remove the solder from the points completely, then re-soldered with better stuff and better wiring. Excellent value for what they are; would ... Read more
The light that is emitted has a good color temperature and pleasant color rendering. I'm using it to light a staircase with 12 steps and it is well bright enough. The light beam is just about enough wide to light the whole staircase.
The shell is quite sturdy and of good build quality with a nice surface. The soldering points are crap. As with many ... Read more
-not very hot after an hour of use;
-Very nice warm colour. -Alluminium casing could be tighter.
-No possibility of mounting, other than glue; it should have some holes to mount on screws. Used 3 pcs. to light up a working space in the kitchen and does an excellent job. Very nice warm colour. Powered with SKU 42... Read more
The aluminum rail seems sturdy, the LEDs are quite bright and all giving the same amount of light. The shape of the shell is perfect for mounting on corners, for example under some cabinet, or to wall/ceiling junctions. Also has little extension on one side to prevent direct light to eyes, if desired. Not bright enough to light up average room, would ... Read more
- the most important: the LEDs are very good. Every single one has the same brightness, so the strip gives you a very good ambient
- the price ist also good. at local stores in germany, you can only get the aluminium profile for that price.
- pretty bright. not sure if its really over 500lm (I doubt it), but 3 or 4 of them is enough to light up a room.... Read more
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.