Customer’s impression:
Good quality small and powerful
Create Review

Share your reviews,
photos and videos here!

  • inverter that can feed any 10 in series 5 parallel >30V 1,6A 50W LED mod

    posted by RBMK9000 on 05/10/2013

    Involvement:Expert (understands the inner workings) - Ownership:1 day to 1 week


    Ready to work, just solder input wires and the led module.
    the heatsink is engineered big enough to work in closed compartments and not overheat.

    It is packaged in a nice box, which can be used as an emergency enclosure to protect you from line voltage until you fin a nicer place to install it.

    It is build to last and looks easily repairable.


    It has no mounting holes, so you have to hotglue it somewhere as i did or make some holes and threads in the heatsink.


    I wonder how it will act if the LED gets accidentaly shorted or disconnected and i don't want to try it and possibly destroy it.
    You can connect a fan to it's outputs, if it has correct series resistor for it's input current. Fans have it written on them with the voltage and wattage.


    It does work silently and starts instantly with no surge to the mains.

Post comment

DX Everywhere