Customer’s impression:
There are no customer's impression yet.
Create Review

Share your reviews,
photos and videos here!

  • Pretty ok, but...

    posted by brainzilla2 on 07/08/2011
    2 0

    Involvement:Expert (understands the inner workings) - Ownership:more than 1 month


    It's cheap and all metal.

    Well build, the plastic-parts are smooth and hard and fit the grinder very well.


    1 - Put herms in top part, place top back on and rotate top till all herbs have been shredded.

    2 - Screw off top silver part and take out shredded herbs.

    3 -The wide black part under the metal-mesh collects the "powder" components which fall through. they will add up in the thin part, so make sure to remove one of the plastic-parts before use!

    4 - When some bigger amount of powder has been collected, open the collector-tube, put in the plastic-part you removed before and press. Repeat every once in a while to make sure no powder gets lost.

    5 - When the collector-tube is full, open the bottom, put the plastic-part below and press it into the tube - reward will appear on top :-)


    The blade-part fell out the top after some days of use.

    I will have to glue it back in - seems it was only press-fitted...

    The main-container (top silver part) could be a lot larger, grinding lots of stuff isn't much fun with this model - too bad since the press-part is very clever!


    It#s nice, but should be wider/bigger at the top.


    If you have a use for it, get it!

Post comment


Get great weekly deals and offers like: Collections