DX » Community » Reviews » Red Laser Module - Focused Line (3.5V~4.5V 16mm 5mW)
Customer’s impression:
good cheap great for this price
Create Review

Share your reviews,
photos and videos here!

Sort by
  • Latest Reviews
  • Most Helpful Reviews
  • Pro Reviews First
  • posted byLandsil on 01/06/2016

    Very easy to beak. You get what you pay for. Regardless of this I was quite happy but next time I will but something better.

    Impression: cheap;

    0 0 0

  • posted by9237762 on 03/27/2015

    For this price it's grate though I lack a proper casing. For me it's great, however the line is significantly ragged near the endings so I guess that it's not appropriate for high-precision applications.

    Impression:great for this price;

    0 0 0

  • posted by8847919 on 12/11/2014

    Strong light. One of three modules had a cross pattern (wrong lens) and two had line pattern (correct lens). All had the same part number.


    0 0 0

  • posted byLeeYoo on 08/09/2014

    I needed two line lasers for my CNC mill, on either side of the spindle, to make a cross. This laser did what I expected from it. Pros: Line is sharp, with minimal dots. And is able to focus <15cm. It also runs directly from the 5volt supply of the mill/computer with minimal current draw (30mA).... Read more

    Impression:good, cheap;

    0 0 0

  • posted byCoverUp on 01/13/2014

    Well price/quality ratio Adjustable focus Small size Bright and shaped line Low power consumption Fragil glass used in the focus chamber can&#180;t tolerate direct impacts (i guess, i did'nt break mine to prove it) Wires are long enough to manipulate, it would be better a conector, but of course... Read more

    0 0 0

  • posted byTanzerBY on 03/02/2013

    1. Inexpensive. 2. Lens can be replaced. 3. Lens can be rotated in a small range of angles for fine adjustment 1. Line quality (intensity and shape) varies a lot along the line. I wanted a thin line at the distance of 200mm. However at both ends line is dashed. 2. The laser spot without the lens... Read more

    0 0 0

  • posted byfabio1964 on 02/15/2013

    Get this laser if you're looking for an entertainment-grade device (eg. a laser for a smoke machine light show or a toy weapon targeting system). For precision measurement and alignment either get a professional cross-laser from a home hardware manufacturer, or a pair of line lasers that you'll I... Read more

    0 0 1

  • posted byfabio1964 on 02/14/2013

    When unpacking, I was really surprised by the mechanical buld quality. The module itself (the cylinder) is made from stainless steel, only the lens holder is made from plastic, but also covered with stainless steel. We use 4 of them to mark the corners of the female mould while producing fiber i... Read more

    0 0 0

  • posted bydimetikon on 02/08/2013

    The laser is focusable, so you can adjust the line to about 1mm thickness or even less, and the line is bright enough even when powered from 3.7 li-ion battery. When focusing the line you must rotate the hole laser around lens :( otherwise the line rotates too. It is really not good for using in... Read more

    0 0 0

  • posted bykappe9000 on 09/04/2012

    Very good quality and bright laser line. You can focuse the line by turning the front of the laser. I use it for a laserscanner and it works perfectly. The laser line is about 2mm at is thinnest at about 5cm from an object. I put in 5v and this works fine, but i am sure this will decrease the of... Read more

    0 0 1

DX Everywhere