I fixed a no name creee torch wit this driver,
5 Levels high,med,low,strobe,sos ??
my one drains about 1000mA/4.0 Volt on cell
(really!,checked with new Fluke DMM)350 mA in med,about 50 mA in low mode,as bright as the former 5 W(?) driver.
I use it with unprotected 18650 cell.
Will order some more,!!
small size,(one board only,Driver with 2 Boards would&... Read more
Well It was easily sautered in because it fits in a AA pill esp. Romisen G-2. The mode is a bright high maybe 700-800mA and a low maybe 350mA not to low though as i would of liked. A slow strobe, then fast strobe, then that annoying 10-sec beacon yes 10 second not SOS. Its a 3.7volt input, I tried 1.5v no luck oh well. I tried this one after another ... Read more
Does what it's supposed to, lights up an LED from lithium batteries.
Has five modes, high/low/slow strobe/fast strobe/really slow strobe.
Runs cool, even pumping a low 70% to the Cree Q5 LED's, they still get brutally bright. Doesn't provide 1000mah, and really, it never could with only one transistor.
The best one draws 700mah from the battery, and ... Read more
nice and cheap ive ran it on 4.5 volts with a cree q5 xre. the different modes are pretty good. dont know if it ouputs 100mah but the cree emitter is still pretty bright. im new to flash light modding so i cant really elaborate on that. i dont think it regulates the current. optimum voltage is 3.6 volts but it will run on higher i bought it to test ... Read more
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.