Involvement:Expert (understands the inner workings) - Ownership:more than 1 month
PCB board quality is well.
It could be powered direct from USB.
It has onboard 3.3v power seurce so You can use it in low voltage applications.
Most of IO could be used in your application.
It also has 4 buttons and 8 indicator LEDs.
It has software USB bootloader, so You just need mini-USB cable and BootloadHID Software (it could be downloaded from anywhere).
Screws, shown on photos not included.
JTAG debug interface is locked by fuses, so you shoud unlock it via SPI first, but it is not a real cons.
Working frequency could not be 16MHz with this MCU. It is only 8MHz.
How to start:
Run BootloadHID Software.
Connect PCB to PC via mini-USB cable
Press and hold button S1
Press and release RST button.
Click Find Device button on the BootloadHID window.
Open *.hex file and download it to Minimum AVR System Board
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.