Involvement:Expert (understands the inner workings) - Ownership:more than 1 month
many reviews that I read said that this LED driver is very easy to modify to add more features.
For few months I was just using it to drive 1x 1 watt LED.
But then I tried to experiment if it can support more LED in series if the input voltage is increased.
To my surprise, it can light 9 LED successfully when I provided 32 V DC input. The current remained at 360mA through out the test with LED amount connected in series = 2 to 9.
Thanks to the warning from other reviewer, I noticed that the capacitor used is only rated at 25 V (output capacitor), so I ran the unit for just 10 seconds to avoid unnecessary trouble when I drove 8-9 LED (26V- 29.5V).
none that I can think of or observe.
Be careful of the 25V rating of the capacitor, it may blow up the cap if you put voltage above 25 V for long period of time
if you want to run this unit for long period of time above 25V, make sure you change the capacitor to 50V.
the PT4115 datasheet says that the absolute maximum input voltage is 45V, but recommended max operating voltage is 30V.
So be careful if you want to use the 40 volts mentioned on the title of this item
very good in terms of price, performance and possible modification.
no regrets in buying them
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.