DX  » Community » Reviews » 52.8mm*41.5mm Aluminum Reflector with Copper Base for SSC P7 LED Emitters
Sort by:
8 Reviews SEARCH
  • 5 Star:887 (88%)
  • 4 Star:121 (12%)
  • 3 Star:00 (0%)
  • 2 Star:00 (0%)
  • 1 Star:00 (0%)

write a review, and get DXPoints

100% of customers would recommend this product to a friend.

    • Overall Rating: 5
    • Price: 4
    • Quality: 5
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Very good reflector!

    posted by vzaremba on 11/17/2012 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:1 day to 1 week

    Pros:
    - perfect fit for an SSC-P7 LED - very high quality, very well milled, shiny reflector surface - all copper base, very good thermal conductivity - plastic ring included to prevent LED plate from touching reflector and casing short circuit - nice hot spot - ...
    Cons:
    none really
    View Detail » 
    • Overall Rating: 5
    • Price: 5
    • Quality: 5
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Works well with XML also

    posted by Flav_3 on 11/08/2012 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:more than 1 month

    Pros:
    this is the OP(orange peel) style, which means more spill and less throw, but trust me when I say that this throws WELL. and gives a very good amount of side spill for when needed up close. With a well driven and well sinked XML, light can reach few hundr...
    Cons:
    Scratches somewhat easily....although most aluminum reflectors do, use a slight damp tissue to LIGHTLY clean if really really ...
    View Detail » 
    • Overall Rating: 5
    • Price: 5
    • Quality: 4
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Good Reflector with nice hot spot

    posted by Fasti on 05/23/2010 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:1 week to 1 month

    Pros:
    I tried it with an XP-G R5 and it made a really nice and tight hot spot with a usefull amount of spill. The hot spot is awesome. Won't get hot after one minute of driving the XG-G at 1,2A (XP-G is mounted on a small aluminium board and glued with arctic sil...
    Cons:
    Very sensitive reflector coating becomes scratches very easily so don't even think of touching it inside the reflctor. Build qu...
    View Detail » 
    • Overall Rating: 5
    • Price: 5
    • Quality: 5
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Great Value

    posted by ElsieTech on 04/03/2010 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:more than 1 month

    Pros:
    will fit into a D cell mag light with some slight modification to the aluminum outside rim. Threading was done very well, base is closer to brass rather than copper. P7 LED # 12721 fits with room to spare. I used 5-mode driver # 20329 which will fit inside ...
    Cons:
    Nothing I can tell.
    View Detail » 
    • Overall Rating: 4
    • Price: 4
    • Quality: 5
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Nice quality

    posted by AlfaRomeoV6 on 07/11/2009 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:more than 1 month

    Pros:
    -Nice quality reflector, very shiny surface -parts fit together perfectly -good fit for an sscp7 -good thermal conduction
    Cons:
    -reflector surface is extremely sensitive, don't touch it with anything if possible to keep it perfect. I scratched it with a m...
    View Detail » 
    • Overall Rating: 5
    • Price: 5
    • Quality: 5
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    GOOD MOD FOR MAG LITE

    posted by gisto on 02/28/2009 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:more than 1 month

    Pros:
    It fits perfectly to replace the bulb of my mag lite with a P7 SSC led directly driving with 3 Ni-Mh D cell. I added another empty cell (as a short circuit) to reach the full battery capacity . The only mods i added are: i turned on a lathe the head of the ...
    Cons:
    none . . . . . . . . . . . . . . . . . . . . . . . . .
    View Detail » 
    • Overall Rating: 5
    • Price: 5
    • Quality: 5
    • Ease Of Use: 5
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Perfect for SSC P7

    posted by techjunkie on 11/20/2008 Certified Owner

    Involvement:Expert (understands the inner workings) - Ownership:1 week to 1 month

    Pros:
    Focuses P7 to give awesome throw, large concentrated hotspot, and giant bright spill. Conducts heat from emitter to pill to reflector to head very well. Unmodified, drops right into WF-500 head. Modified, makes Mag C/D head into same torch as sku 14412. Ref...
    Cons:
    Pill doesn't appear to be pure copper (probably is brass), which made it more difficult to cut (see other thoughts).
    View Detail » 
    • Overall Rating: 5
    • Price: 5
    • Quality: 5
    • Ease Of Use: 3
    • Usefulness: 5
    2 DXPoints
    earned for this post
    Very tight beam

    posted by Packhorse on 07/03/2008 Certified Owner

    Involvement:General (knows how to use it) - Ownership:1 day to 1 week

    Pros:
    This reflector offers an extreamly tight beam. Better than a 8deg MR16 or 6deg 10w HID when used with a P7 LED. The copper base can be unscrewed and you can mount a bare emitter to it. The base and reflector then act as a heatsink though I think you will al...
    Cons:
    To get it to mount in a mag head flush you need to grind/machine down the lip. It took me 30 minutes with a dremel and sandpape...
    View Detail » 
Page 1 of 1
Go to Page:
  • Previous
  • 1
  • Next

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections