Involvement:General (knows how to use it) - Ownership:1 day to 1 week
This reflector offers an extreamly tight beam. Better than a 8deg MR16 or 6deg 10w HID when used with a P7 LED.
The copper base can be unscrewed and you can mount a bare emitter to it.
The base and reflector then act as a heatsink though I think you will also need more heat sinking.
To get it to mount in a mag head flush you need to grind/machine down the lip. It took me 30 minutes with a dremel and sandpaper.
Be carefull that it does not get too hot as it seems to be coated and this may blemmish.
This then allowed me to use 2 x 1.8mm glass lenes.
Short range it does give a slight donut effect but its not a problem
Very very good choice for a mag dive light conversion.
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.