Police Style Car 12V 12-LED Red/Blue Stroboscopic Light with 3-Mode Controller

LOTS of cable maybe 4m? Reaches from the front of a sedan to the back.
The third ultra fast flash sequence is very quick around the same as an upmarket unit which I was very surprised with (I have a different model with older flash controller and the flashes were slow, this one is twice as good).
Comes with ample power cable as well, maybe a couple feet worth.
The LED are BRIGHT. The blue more so than the red but let just say there is no way you could look into them directly when flashing. If anything its too bright, but we all know that's never an option with LED's ;)
It's hard to measure the power usage of them, the most I read off the multimeter at the LED end was 10V so its possibly just passing the 12V straight to each LED segment which is fine, it appears each segment is setup to accept 10-12V each with there resistor. I think the resistors are 75ohm for the red and something else for the blue's. The most I got was 100mA per segment, so at most I'd hazard a guess at 4-500mA all up?
You can plug in the segments in whatever order of 4 you like (remembering that its a 2/2 flashing system).