Involvement:Expert (understands the inner workings) - Ownership:more than 1 month
It's cheap and all metal.
Well build, the plastic-parts are smooth and hard and fit the grinder very well.
1 - Put herms in top part, place top back on and rotate top till all herbs have been shredded.
2 - Screw off top silver part and take out shredded herbs.
3 -The wide black part under the metal-mesh collects the "powder" components which fall through. they will add up in the thin part, so make sure to remove one of the plastic-parts before use!
4 - When some bigger amount of powder has been collected, open the collector-tube, put in the plastic-part you removed before and press. Repeat every once in a while to make sure no powder gets lost.
5 - When the collector-tube is full, open the bottom, put the plastic-part below and press it into the tube - reward will appear on top :-)
The blade-part fell out the top after some days of use.
I will have to glue it back in - seems it was only press-fitted...
The main-container (top silver part) could be a lot larger, grinding lots of stuff isn't much fun with this model - too bad since the press-part is very clever!
Note:Stock and Availability shown on this site is for your reference only. While
we strive to provide the most accurate and timely stock and availability information,
availability information may become out of date and may change between the time
you added an item to cart and the time your order is received.
Quantities on clearance items are limited. Prices are current at time of posting. DX Reserves the right to change prices at any time without notice.