48W 3300K 600x3528 SMD LED Warm White Light Strip (10-Meter/12V)

The striplight comes on a roll sealed in an antistatik bag. The striplight can easily be cut as there is a joint after every 3rd LED. So you can either use the 200 3-LED-sets or you can use the complete strip. As there are soldering points on each side of the 3-LED-set you can make a cut after 2 meter and then connect the rest of the 8 meter with an cable. Or you use 2x12V powersupplies if you do not have the minimum required 4A powersupply. I used the striplight with a 5A 12V powersupply as a replacement for 200Watt Bulbs in a basement hallway and this is much better now.
The back side of the strip has an adhesive tape, so it is very easy to attach to a rack, cabinet or anywhere on appropiate surface in the car. Even on raw stone in our basement the tape is working.